A trip switch going off is one of the most common calls I get. The good news is that a trip is the fuse box doing its job: it has spotted a problem and cut the power before anything worse happens. Most of the time you can find the cause yourself in a few minutes, safely, without touching anything you shouldn’t.
If you’d rather be walked through it, use the trip switch helper on our home page. Tap the switch that’s down in your fuse box and it shows you what to do.
First, which switch has tripped?
Open the door on your fuse box (the consumer unit) and look for the switch pointing the opposite way to the rest. There are three kinds:
- A circuit breaker (MCB): a narrow switch with a label such as “Sockets downstairs” or “Lights”. Only that one circuit has gone off.
- An RCD: a wider switch, usually with a small “T” or “Test” button. It protects you from electric shock and cuts every circuit underneath it, which is why half the house can go off at once.
- The main switch: the large switch that turns off the whole house. It isn’t normally a trip device, so if it’s off and nobody turned it off, ask an electrician to check it before you keep resetting it.
If one circuit breaker has tripped
A breaker trips when a circuit is overloaded or something on it has a fault. Kettles, toasters, heaters and washing machines are the usual suspects.
- Unplug everything on that circuit, or switch off the lights on it.
- Push the breaker back up.
- Plug things back in one at a time. If it trips as soon as one appliance goes in, that appliance is the problem. Stop using it.
If the breaker won’t stay up even with everything unplugged, the fault is in the wiring, a socket or a light fitting. That needs an electrician.
If an RCD has tripped
RCDs trip when electricity leaks to earth. Common causes are a faulty appliance, water getting into an outside socket or light, or a damaged cable.
- Switch every circuit breaker under that RCD down.
- Push the RCD back up.
- Switch the breakers back up one at a time. When the RCD trips again, the last breaker you switched on is the circuit with the fault.
- Leave that breaker off, unplug what’s on that circuit, and try again.
An RCD that trips after rain often points to an outdoor socket, garden light or a cable to an outbuilding that has let water in.
Nothing has tripped but you have no power?
Look outside. If your neighbours and the street lights are off too, it’s a power cut. Call 105, the free national power cut number, to report it and get updates. If it’s only your home, call an electrician.
When to stop and call an electrician
- A switch trips again with nothing plugged in.
- It keeps tripping at random and you can’t link it to an appliance.
- You can smell burning, hear buzzing or crackling, or see scorch marks on a socket, switch or the fuse box. Don’t reset anything: switch off at the main switch if it’s safe to, and call.
- Your fuse box has old-style fuses with fuse wire rather than switches.
And whatever happens, never take the cover off your fuse box.
How I find the fault
I test each circuit in turn to find exactly where the problem is, rather than guessing, then explain what I’ve found and fix it, often on the same visit. I take 24-hour call-outs across Cardiff and South Wales for the times the power goes off at the worst moment.
If your power keeps tripping, see electrical fault finding, call me on 029 2000 1399 or send a quick message.

