4.9 from 46 Google reviews · Established 2014 029 2000 1399
G 4.9 from 46 Google reviews

Electric Shower Installation in Port Talbot

A new or upgraded electric shower on a correctly sized circuit, with safe isolation and the paperwork to prove it.

  • Covering Port Talbot
  • Qualified & insured
  • Free no-obligation quotes
  • Local since 2014
Jorge Simoes, Cardiff Electrician
Jorge SimoesYour local electrician. You deal with me from quote to finish.
  • 4.9 on Googlefrom 46 reviews
  • Local since 2014based in Cardiff CF5
  • Qualified & insuredwork to BS 7671
  • Free quotesno obligation, no pressure

Electric Shower Installation in Port Talbot: An electric shower needs its own dedicated circuit from the consumer unit, with cable sized for the shower's power rating, RCD protection and a separate isolation switch. Cardiff Electrician installs new electric showers across Cardiff and upgrades the circuit when a more powerful unit replaces an old one.

Electric Shower Installation for Port Talbot homes

The most common type of home in Port Talbot is semi-detached houses (45% of households, Census 2021). Damp, mould and tired bathroom electrics are some of the most common jobs we see in Port Talbot. Bathroom work follows the BS 7671 zone rules, so the right fittings go in the right place and every circuit is RCD protected.

14,068households in Port Talbot
33%of homes are terraced
59%of homes are owner-occupied
27 mifrom Cardiff city centre

Housing figures: ONS Census 2021.

Electric showers are one of the biggest loads in any home. A higher kW shower gives a better flow, but it also needs a heavier cable and the right protective device. Fitting a more powerful unit on the old cable is a common cause of melted connections and tripping, so we always check the circuit first.

Jorge looks at the shower you are fitting, the existing cable route and your consumer unit, then tells you whether it is a like-for-like swap or a circuit upgrade. We handle the electrical side and can work alongside your plumber or bathroom fitter so the job runs in the right order.

Signs you need it

  • You are replacing an old shower with a more powerful model
  • Your shower trips the breaker or cuts out mid-wash
  • The shower isolation switch is scorched or feels warm
  • You are adding an electric shower to a new bathroom
  • Your shower has no RCD protection at the consumer unit

What's included

Circuit sizing

We check the shower's kW rating against your existing cable and breaker, and upgrade the cable or protective device where the new unit needs more than the old circuit can supply.

Dedicated shower circuit

New installations get their own circuit from the consumer unit with RCD protection, routed to avoid the bathroom zones and kept neatly out of sight wherever practical.

Isolation switch

We fit a ceiling pull-cord or wall-mounted isolation switch outside the restricted zones, so the shower can be fully switched off for cleaning or maintenance.

Connection and testing

We connect the shower, check it heats and switches correctly and test the circuit, then issue the relevant certificate for the work under BS 7671.

Where we work in Port Talbot

We cover the whole of Port Talbot, including:

Questions about electric shower installation in Port Talbot

Do you do electric shower installation in Port Talbot?

Yes. Jorge carries out electric shower installation across Port Talbot, including Aberavon, Sandfields, Baglan, Taibach, Margam and Cwmafan. We are based in Cardiff, about 27 miles from Port Talbot. Call 029 2000 1399 or send the form for a free, no-obligation quote.

Can I fit a more powerful shower on my existing cable?

Sometimes, but often not. Each kW rating needs a minimum cable size and breaker, and older circuits were usually sized for lower powered showers. Overloading the cable can cause overheating at connections. Send us the model and we will check your existing circuit before you buy, if possible.

What affects the cost of a shower installation?

The main factors are whether the existing cable is suitable, the distance and route from the consumer unit to the bathroom, whether there is space in the consumer unit, and how easily cables can be hidden. A like-for-like swap is much simpler than running a new circuit through a finished house.

Do you do the plumbing too?

We handle the electrical side of the installation: the circuit, isolation switch, connection and testing. The water supply and pipework are a plumbing job, and we regularly coordinate with plumbers and bathroom fitters around Cardiff so the electrics are ready at the right stage.

What regulations apply to shower wiring?

Shower circuits must follow BS 7671, including the bathroom zone rules and RCD protection. A new circuit is also notifiable under Building Regulations. You receive an Electrical Installation Certificate for a new circuit, or a Minor Electrical Installation Works Certificate for alterations to an existing one.

Other electrical work in Port Talbot

Electric Shower Installation in nearby areas

More about electric shower installations and our electrical services in Port Talbot.

Electric Shower Installation in Port Talbot? Talk to Jorge.

Free, no-obligation quotes across Cardiff and South Wales.

Web Design By UKBox
UKBox Logo

Close Button

Web Design By UKBOX