An electric shower that goes cold halfway through, cuts out or trips the power is frustrating. Some causes are simple things you can check yourself. Others are signs of a problem that needs an electrician. Here’s how to tell the difference.
Common causes you can check
- A scaled-up shower head. In hard water areas, limescale blocks the holes in the shower head. Less water flows through the shower, it overheats and the safety cut-out switches it off. Descaling or replacing the head often fixes it.
- A kinked or blocked hose. Same effect as a blocked head. Check the hose isn’t twisted and water flows freely.
- Low water pressure. If your water pressure has dropped, for example when other taps are running, the shower may struggle to stay within its safe temperature.
- The wrong setting. On a cold day, try a lower flow, which gives hotter water, rather than turning the power setting up.
If it trips the power
If the shower trips a circuit breaker or the RCD in your fuse box, don’t keep resetting it. It can mean water has got into the shower unit, the heating element has failed, or there’s a fault on the circuit. Leave the shower circuit switched off and have it checked.
Stop using it and call an electrician if
- You can smell burning, or see scorch marks on the shower, the pull-cord switch or the isolator.
- The pull-cord switch feels warm, crackles or has discoloured.
- Water is leaking from the shower unit itself.
- It keeps cutting out even with a clean head and good water pressure.
Showers draw a lot of current, often 8.5kW to 10.5kW, so a loose connection or an undersized cable can overheat. Burnt pull-cord switches are one of the most common faults I find.
Upgrading to a more powerful shower
If you’re replacing your shower with a more powerful one, the cable and the protection in your fuse box must be rated for the new shower. A 10.5kW shower usually needs a bigger cable than an older 7kW or 8.5kW one. Swapping the unit without checking is a common cause of overheating, so it’s always worth having the circuit checked when you upgrade.
Getting it sorted
I install and repair electric showers across Cardiff and South Wales, including the circuit, the isolator and RCD protection, all tested and certified. If your shower is playing up, read more about electric shower installation, call 029 2000 1399 or send a photo on WhatsApp.

